D-Link DXS-1100 series User Manual - page 23
D-Link 10 Gigabit Ethernet Switch User Manual
1
1
6
6
4
Configuration
The features and functions of the Switch can be configured for optimum use through the Web-based
Management Utility.
Smart Wizard Configuration
After a successful login, the Smart Wizard will guide you through essential settings of the Switch. If you do
not plan to change anything, click Exit to leave the Wizard and enter the Web Interface. You can also skip it
by clicking Ignore the wizard next time for the next time you logon to the Web-based Management.
System IP Information
IP Information
will guide you to do basic configurations in 3 steps for the IP Information, access password, and SNMP.
Select Static, DHCP or BOOTP, and enter the desired new IP Address, select the Netmask and enter the
Gateway address, then click the Next button to enter the next User Accounts Settings window. (No need to
enter IP Address, Netmask and Gateway if DHCP and BOOTP are selected.) The Smart Wizard is for the
quick setting in IPv4 environment.
If you are not changing the settings, click the Exit button to go to the main page of
Web-based Management. You can also tick Ignore the wizard next time check box to skip wizard setting when the
Switch boots up
.
Figure 4.1 – System IP Information in Smart Wizard
NOTE: The Smart Wizard supports quick settings
for IPv4 network.