D-Link DXS-1100 series User Manual - page 25
Manual is about: 10 gigabit Ethernet switch
of
121
D-Link 10 Gigabit Ethernet Switch User Manual
1
1
8
8
SNMP
The SNMP Setting allows you to quickly enable or disable the SNMP function. The default SNMP Setting is
Disabled. Click Enabled and then click Apply & Save to make it effective.
Figure 4.3 – SNMP in Smart Wizard
NOTE: Changing the system IP address will
disconnect you from the current connection.
Please enter the correct IP address in the Web
browser again and make sure your PC is in the
same subnet with the switch. See Login Web-
based Management for a detailed description.