D-Link DXS-1100 series User Manual - page 60
D-Link 10 Gigabit Ethernet Switch User Manual
5
5
3
3
Figure 4.71 – L2 Features > FDB > MAC Address Table Settings (MAC Address Learning)
The fields that can be configured are described below:
From Port / To Port: Select the range of ports that will be used for this configuration here.
State: Enable or disable the MAC address learning function on the ports specified here.
Click Apply to accept the changes made.
L2 Features > FDB > MAC Address Table
This window is used to view the entries listed in the MAC address table.
Figure 4.72 – L2 Features > FDB > MAC Address Table
The fields that can be configured are described below:
Port: Select the port that will be used for this configuration here.
VID: Enter the VLAN ID that will be used for this configuration here.
MAC Address: Enter the MAC address that will be used for this configuration here.
Click Clear Dynamic by Port to clear the dynamic MAC address listed on the corresponding port.
Click Clear Dynamic by VLAN to clear the dynamic MAC address listed on the corresponding VLAN.
Click Clear Dynamic by MAC to clear the dynamic MAC address entered.