D-Link DXS-1100 series User Manual - page 40
D-Link 10 Gigabit Ethernet Switch User Manual
3
3
3
3
Figure 4.33 – System > Port Configuration > Jumbo Frame
The fields that can be configured are described below:
From Port / To Port: Select the appropriate port range used for the configuration here.
Maximum Receive Frame Size: Enter the maximum receive frame size value here. This value must be
between 64 and 9216 bytes. By default, this value is 1536 bytes.
Click Apply to accept the changes made.
System > System Log > System Log Settings
This window is used to view and configure the system’s log settings. System logs record and manage events,
as well as report errors and informational messages.
Figure 4.34 – System > System Log > System Log Settings
The fields that can be configured are described below:
Source Interface State: Enable or disable the source interface’s global state.
Buffer Log State: Enable or disable the buffer log’s global state here. Options to choose from are Enable,
Disabled, and Default. When selecting the Default option, the buffer log’s global state will follow the default
behavior.
Severity: Select the severity value of the type of information that will be logged. Options to choose from are
0 (Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4 (Warnings), 5 (Notifications), 6 (Informational),
and 7 (Debugging).
Discriminator Name: Enter the discriminator name used here. This name can be up to 15 characters long.