D-Link DXS-1100 series User Manual - page 17
D-Link 10 Gigabit Ethernet Switch User Manual
1
1
0
0
E) Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular
attention should be given to supply connections other than direct connections to the branch circuit (e.g. use
of power strips)."
Step 3: Plugging in the AC Power Cord with Power Cord Retainer
To prevent accidental removal of the AC power cord, it is recommended to install the power cord retainer
together with the power cord.
A) With the rough side facing down, insert the Tie Wrap into the hole below the power socket.
Figure 2.4 – Insert Tie Wrap to the Switch
B) Plug the AC power cord into the power socket of the Switch.
Figure 2.5 – Connect the power cord to the Switch
C) Slide the Retainer through the Tie Wrap until the end of the cord.