D-Link DXS-1100 series User Manual - page 41
D-Link 10 Gigabit Ethernet Switch User Manual
3
3
4
4
Write Delay: Enter the interval for periodic writing of the logging buffer to FLASH. This value must be
between 0 and 65535 seconds. By default, this value is 300 seconds. Tick Infinite to disable the write delay
feature.
Click Apply to accept the changes made for each individual section.
System > System Log > System Log Discriminator Settings
This window is used to view and configure the system log’s discriminator settings.
Figure 4.35 – System > System Log > System Log Discriminator Settings
The fields that can be configured are described below:
Discriminator Name: Enter the discriminator name here. This name can be up to 15 characters long.
Action: Select the facility’s behavior option and the type of facility that will be associated with the selected
behavior here. Behavior options to choose from are Drops and Includes.
Severity: Select the severity behavior option and the value of the type of information that will be logged.
Behavior options to choose from are Drops and Includes. Severity value options to choose from are 0
(Emergencies), 1 (Alerts), 2 (Critical), 3 (Errors), 4 (Warnings), 5 (Notifications), 6 (Informational), and
7 (Debugging).
Click Apply to accept the changes made.
Click Delete to remove the specified entry.
System > System Log > System Log Server Settings
This window is used to view and configure system log’s server settings.
Figure 4.36 – System > System Log > System Log Server Settings
The fields that can be configured are described below:
Host IPv4 Address: Specifies the IPv4 address of the system log server.
Host IPv6 Address: Specifies the IPv6 address of the system log server.