D-Link DXS-1100 series User Manual - page 81
D-Link 10 Gigabit Ethernet Switch User Manual
7
7
4
4
L2 Features > L2 Multicast Control> MLD Snooping > MLD Snooping Mrouter Settings
This window is used to configure the specified interface(s) as the router ports or forbidden to be IPv6
multicast router ports on the VLAN interface on the Switch.
Figure 4.103 – L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Mrouter Settings
The fields that can be configured are described below:
VID: Enter a VLAN ID between 1 and 4094.
Configuration: Select the port configuration. Options to choose from are Port and Forbidden Port.
Port - Select to have the configured ports to be static multicast router ports.
Forbidden Port - Select to have the configured ports not to be multicast router ports.
From Port / To Port: Select the appropriate port range used for the configuration here.
Click Apply to accept the changes made.
Click Delete to remove the specified entry.
Click Find to locate a specific entry based on the information entered.
Click Find All to view all the entries.
Enter a page number and click Go to navigate to a specific page when multiple pages exist.
L2 Features > L2 Multicast Control> MLD Snooping > MLD Snooping Statistics Settings
This window is used to clear and display the MLD snooping related statistics.
Figure 4.104 – L2 Features > L2 Multicast Control > MLD Snooping > MLD Snooping Statistics Settings
The fields that can be configured are described below:
Statistics: Select the interface here. Options to choose from are All, VLAN, and Port.
VID: Enter a VLAN ID between 1 and 4094. This is available when VLAN is selected in the Statistics list.