D-Link DXS-1100 series User Manual - page 96
D-Link 10 Gigabit Ethernet Switch User Manual
8
8
9
9
Figure 4.127 – QoS > Basic Settings > Queue Settings
The fields that can be configured are described below:
From Port / To Port: Select the appropriate port range used for the configuration here.
Queue ID: Select the queue ID value here. Options to choose from are 0 to 7.
WRR Weight: Enter the WRR weight value here. This value must be between 0 and 127. To satisfy the
behavior requirements of Expedited Forwarding (EF), the highest queue is always selected by the Per-hop
Behavior (PHB) EF and the schedule mode of this queue should be strict priority scheduling. So the weight
of the last queue should be zero while the Differentiate Service is supported.
Click Apply to accept the changes made.
QoS > Basic Settings > CoS to Queue Mapping
This window is used to view and configure the CoS-to-Queue mapping settings.
Figure 4.128 – QoS > Basic Settings > CoS to Queue Mapping