Hach ANATEL PAT700 User Manual - 5.11 Factory
Page 81
Setup
5.11 Factory
The factory icon enables factory personnel to enter information that may not be changed
by other users. Information on the factory dialog boxes can be viewed by any user but
can be changed only by the administrator or a factory user.
Entry into the factory dialog box for the purpose of changing the settings requires entry of
the user ID and password. Touching the cancel icon enables read-only access to factory
.
5.11.1 General tab
Model number text box displays the PAT700 model number.
Serial number text box displays the PAT700 serial number.
Factory calibration date text box displays the date of the last factory calibration in ISO
“yyyy-mm-dd” format.
Export oxidation buffers icon copies all oxidation buffers (up to five) to a connected
USB flash drive. Before copying begins, the analyzer verifies that there is data to export
and that a USB flash drive is inserted into the analyzer’s USB port.
Return icon returns you to the setup dialog box.
Figure 59 Factory settings dialog box, general tab