Leaf Aptus-II Installation Manual - page 17
Other manuals for Aptus-II:
User Manual, User Manual
of
80
10
the Leaf Digital Camera Back to a Power Supply
Connecting the Leaf Digital Camera Back to a Power
Supply
1. Insert the end of the external power adaptor into the FW port on the
/HDIAptusII digital camera back.
Figure 8: Insert the external power supply adaptor
2. Connect the other end of the external power adaptor to the 12V DC
power supply.
Using the Stylus
The Leaf Aptus
II digital camera back is supplied with a stylus. Use the
stylus to tap the touch screen.
Figure 9: The stylus