Leaf Aptus-II Installation Manual - page 32
Other manuals for Aptus-II:
User Manual, User Manual
of
80
Hasselblad H1
25
Installation Procedures
The procedures in this section together constitute the basic installation
process.
Installing the Leaf AptusII Mask
The Leaf Aptus
II mask enables you to view the exact area that the
/HDIAptusII digital camera back captures. Before you can install the mask, you
must remove the camera’s viewfinder.
To install the Leaf Aptus mask:
1. Place the mask on top of the focusing screen. Avoid touching the
surface with your fingers.
Figure 22: Inserting the Leaf Aptus mask
2. Reattach the camera viewfinder.
Important! Never touch the surface of the mask. Use a blower or soft lens
brush to remove dust.
If you remove the mask, be careful not to scratch the focusing screen of the
camera.