Leaf Aptus-II Installation Manual - page 35
Other manuals for Aptus-II:
User Manual, User Manual
of
80
28
Installing the Leaf Aptus
-II Mask
Removing the Leaf Digital Camera Back from the Camera Body
1. Place the camera on a steady, flat surface.
2. Turn the camera off.
3. Disconnect the FireWire cable.
4. Press gently on the center of the magazine release button, twist it
clockwise until it stops (1), and then press the button firmly inwards
toward the camera body (2) to release Leaf Aptus
-II.
Important! Make sure to press on the center of the magazine release
button, not on the lever.
Figure 25: Removing the Leaf Aptus
-II digital camera back from a a
Hasselbald H1 camera