Leaf Aptus-II Installation Manual - page 56
Other manuals for Aptus-II:
User Manual, User Manual
of
80
Mamiya RB
49
Connecting the Cables
1. Connecting the Camera-to-Back Sync Cable
2. Insert one end of the cable into the Mamiya Lens Flash socket.
3. Insert the opposite end of the cable into the Camera-to-Back Sync
socket on the adaptor plate.
Figure 46: Connecting a Camera-to-Back Sync cable to Leaf Aptus
II
Connecting the Flash Sync Cable
Note: You can use only external flash or strobe light with Leaf AptusII.
Connect the Flash Sync cable to the Flash Sync connector on Leaf Aptus
II.
Figure 47: Connecting a Flash Sync cable to the Leaf Aptus
II digital camera back