Leaf Aptus-II Installation Manual - page 67
60
Before Getting Started
Before Getting Started
This chapter describes the Leaf Aptus
II digital camera back installation for
large format cameras and other view cameras.
With the Rollei or Schneider electronic shutter and the Rollei Lens Control or
Schneider Shutter Control unit, the Leaf Capture application enables you to
change shutter speed and lens aperture on the large format camera from the
application.
The Leaf Aptus
II digital camera back can also be used with a mechanical
shutter lens such as the Copal shutter.
Items Required for the Installation
For a detailed list of the items required for installation, see Items Required
for the Installation, page 4.
The following table shows the extra items that are required for the
/HDIAptusII digital camera back installation when working with a large format
camera
Important: To avoid installation and operation problems, use only the
accessories supplied with the Leaf digital camera back.
Items
Required for Basic
Installation
4” x 5” Graflok adaptor or other large format adaptor
Yes
Rollei Lens Control or Schneider Shutter Control
Optional
Lens Control power interface
Optional
Rollei-Aptus II Lens Control interface cable
Optional
Schneider-Aptus II Shutter Control interface cable
Optional