Leaf Aptus-II Installation Manual - page 48
Other manuals for Aptus-II:
User Manual, User Manual
of
80
Contax 645 AF
41
Attaching the Leaf Digital Camera Back to the Camera Body
1. Mount the Contax 645 camera body on a tripod.
2. Remove the protective cover plate from the Leaf Aptus
II digital camera
back.
3. Attach the Leaf Aptus
II digital camera back to the camera body by
moving the Leaf Aptus
II digital camera back toward the camera body
and check that the camera’s support hooks fit into the slots on the
/HDIAptusII digital camera back.
4. Push the top of the Leaf Aptus
II digital camera back toward the camera
body until it locks into place.
Figure 38: Attaching the Leaf Aptus
II digital camera back to a Contax 645
camera body