Leaf Aptus-II Installation Manual - page 65
Other manuals for Aptus-II:
User Manual, User Manual
of
80
58 Installation
Procedures
Removing the Leaf Digital Camera Back From the Camera Body
1. Place the camera on a steady, flat surface.
2. If any of the following cables are connected, disconnect them:
• FireWire
cable
• Camera Control cable
• Camera-to-Back
Sync
cable
• Flash
Sync
cable
3. Slide and push the Release button.
Figure 57: Removing the Leaf Aptus
II digital camera back from Mamiya 645 AF-D
camera.
4. Tilt the camera back away from the camera body to remove it.
Release Button