Leaf Aptus-II Installation Manual - page 42
Other manuals for Aptus-II:
User Manual, User Manual
of
80
Hasselblad (500 Series)
35
Connecting the Camera Control Cable
Notes: This section is for users of Hasselblad 553ELX, 503CW + winder,
and 503EL-M cameras only.
The Camera Control cable should be used in Remote mode only when you
trigger the camera from the application.
The Camera Control cable is not supplied with Leaf Aptus
,,. It can be ordered
separately
Insert one end of the cable into the Hasselblad Remote Control socket, and
then insert the opposite end of the cable into the Camera Control socket on
Leaf Aptus
II.
Figure 32: Connecting a Camera Control cable to a Hasselblad 553ELX/500
EL-M camera
Camera Control
Socket
Remote Control
Socket