Leaf Aptus-II Installation Manual - page 27
20
Installing the Focusing Screen
Figure 16: Installing the supplied focusing screen
2. Using the tweezers, push the focusing screen frame upwards until you
hear a click.
Important: Never apply pressure on other parts as this might affect focus.
Handle the focusing screen surfaces with care. They are delicate and easily
damaged.
Never touch the surface of the focusing screen. If there is dust on the
screen, use a blower or soft lens brush to remove it. If the focusing screen
needs more thorough cleaning, contact the nearest authorized
/HDIVHUYLFH
center
RU\RXUGHDOHU. Do not attempt to clean the focusing screen yourself.
Attaching the Leaf Digital Camera Back to the Camera Body
1. Mount the Mamiya 645 AFD camera body on a tripod.
2. Remove the protective cover plate from the digital camera back.
3. Align the groove on the digital camera back with the holder bracket on
the camera body, and then bring the top of the digital camera back to the
camera body.
4. Push the top of the camera back toward the camera body until it locks
into place.
Figure 17: Attaching the Leaf Aptus
II digital camera back to a Mamiya 645
camera body