NEC Univerge SV8100 Quick Reference Manual - page 4
4
Making Calls
To Place Internal Calls
•
Press the DSS
*
button of the person you wish to call and you can talk handsfree after the tone
or lift the handset.
•
Or, Lift the handset or press Speaker and dial the 3-Digit Extension Number
•
Softkeys allow options to Ring/Voice (Toggles from Handsfree to Ringing) MW (turn callback
message waiting lamp on) or VMsg (leave a voicemail message)
To Place External Calls
•
Lift the Handset or press Speaker
•
Dial 9 and the Telephone number
•
Lift the handset or talk handsfree
*DSS button (Direct Station Select) is one of the programmable buttons to call another extension and
see a busy status.
Answering Calls
To Answer Internal Calls
•
When phone beeps, answer hands free or, if the phone rings lift the handset or press speaker.
•
The MIC lamp must be on for caller to hear you hands free. (Press the button to toggle on/off)
To Answer External Calls
•
When the phone rings lift the handset or press the Speaker button to answer hands free.
•
The MIC lamp must be on for caller to hear you hands free. (Press the button to toggle on/off)
Call Park
(a parked call may be retrieved from any phone)
To Park or Retrieve Parked callers
•
To place a caller in park use the Park Keys.
•
To retrieve a parked caller press the lit Park key.
•
Example: While talking to a caller place them on Park 1. Page and instruct the recipient of the
call on which park key the call is located. You can also pick the Park 1 caller back up and transfer
them to the intended recipient’s extension number.