NEC Univerge SV8100 User Manual - page 7
7
How to set intercom calls to ring vs. go to speakerphone:
1. Press Speaker button
2. Dial 723 for signaling (ringing) or 721 for voice call (speakerphone)
3. Press Speaker to finish
PERSONALIZING YOUR EXTENSION
How to program your name on your extension:
1. Press the Speaker button
2. Dial 700
3. Dial your 3-digit extension number
4. Enter your name (see diagram on page 4):
--Use the keypad to enter letters, eg. press 1 three times for the letter C
--To delete a character, press the Feature key
--To move forward, press the # key once; to make a space, press the #
key twice
5. Press HOLD
6. Press Speaker to finish
How to program personal speed dial numbers (up to 10):
1. Press the Speaker button
2. Dial 755
3. Press the key you want to program (1-9, 0 on the keypad)
4. Dial 9 and the telephone number (include 1 + area code for long distance)
5. Press HOLD
6. Enter name if desired (see diagram on page 4):
--Use the keypad to enter letters, eg. press 1 three times for the letter C
--To delete a character, press the Feature key
--To move forward, press the # key once; to make a space, press the #
key twice
7. Press HOLD
8. Press Speaker to finish
--or--
7. Repeat steps 3 through 7 to program more speed dial numbers
8. Press Speaker to finish
How to view and dial personal speed dial numbers:
1. Press the Dir softkey
2. Press the STA softkey
3. Use the softkey arrows to scroll through personal speed dial numbers 1-10
4. Press the Dial softkey to dial the selected number
How to use shortcuts to personal speed dial numbers:
1. Lift the handset
2. Dial #7 then the key you programmed (1-9, and 0 to access speed dial #10)