Oce Arizona 500 User Manual - page 102

Océ | Printer Maintenance

5-14 

13.

Continue pulling the leading edge of the cloth across the Teflon sheet until it reaches 

the take-up core (see Figure 5-13). Remove the paper backing off the leading edge of 

the cloth so it can be taped evenly to the empty take-up core.

Figure 5-13  Feeding the Cloth (Step 2)

14.

Attach the cloth onto the empty core (see Figure 5-14).

Figure 5-14  Attach the Cloth to the Take-up Core

15.

Rotate the supply roll to take out the slack in the cloth path. If you lowered the 

maintenance station, carefully lift the station and insert the release pins back into the 

locking holes to secure it. Ensure that both pins (handles) are fully seated in their 

respective holes.