Oce Arizona 500 User Manual - page 113
System Errors
7/26/04
6-7
SYSTEM ERROR [press ACCEPT to
restart]
CARRIAGE SPEED ERROR
If the error returns after you press ACCEPT
to restart the printer, call your authorized
service representative.
SYSTEM ERROR [press ACCEPT to
restart]
CARRIAGE LCA FAILURE
If the error returns after you press ACCEPT
to restart the printer, call your authorized
service representative.
SYSTEM ERROR [press ACCEPT to
restart]
BLOTTER MOTOR or ENCODER
This error can occur after lowering the
maintenance station to clean the print head
nozzle plates. Check if the blotter cloth is
loose and take up any slack by turning the
supply roll of the blotting cloth. Press
ACCEPT to restart the printer. If the error
does not clear, call your authorized service
representative.
System Error
Uncorrectable Feed Error
Check for loose media and the correct
attachment of the take-up and supply cores
to the mandrel hubs. Ensure the media-
encoder pinch roller and the media drive-roll
pinch rollers are in the correct position.
The media may be outside the printer
specification. Try an approved type of
media. If the error does not clear, call your
authorized service representative.
CONTROL PANEL MESSAGE
EXPLANATION AND ACTION