Oce Arizona 500 User Manual - page 91
Operator Maintenance Schedule
7/26/04
5-3
Carriage Rails
Wipe clean with a lint-free cloth and alcohol
only. Use a lint-free cloth saturated (but not
dripping) with isopropyl alcohol (91% or higher
isopropyl alcohol and 9% or less deionized
water).
Once a week
Cleaning Solution/
Fluid
Refill or replace the bottle when low or as indi-
cated by control panel messages (see “Clean-
ing Solution/Fluid” on page 2-2).
As required
Drip Roller
Wipe clean with a lint-free cloth and cleaning
solution/fluid.
Daily
Encoder Strip
Wipe clean with a lint-free cloth and alcohol
only. Take extra care to not bend the strip.
Once a month
Heater Air Filters
Periodically inspect and replace the two
heater air filters (see “Heater Filters” on
page 5-16).
Every 60 days
or as required
Ink Supply Bottles
Replace when empty or as indicated by con-
trol panel messages (see “Ink Supply
Changes” on page 2-3).
As required
Ink Waste Container
Empty when control panel message indicates
the container is full. Follow ink MSDS require-
ments for disposal (see “Waste Container” on
page 2-2).
As required
Interior and Exterior
Wipe surfaces clean with a lint-free cloth and
alcohol only.
Once a week
Left and Right End
Caps
All doors must be closed or secured at all
times to capture fumes and heat.
Always
Media Drive Roller
Wipe clean with a lint-free cloth and alcohol
only.
Wipe clean with a sponge/scrubber and alco-
hol only (see "Cleaning the Media Drive
Roller" on page 5-5).
Every media
change
Weekly
Media Encoder Turn
Bar
Wipe the cylindrical-shaped bar clean with a
lint-free cloth and alcohol.
Every media
change
Plexiglas
Windows
Wipe clean with a lint-free cloth and alcohol
only.
As required
Description
Procedure
Frequency