Oce Arizona 500 User Manual - page 23
Manual is about: 75-inch wide format six-color printer
of
156
Ink Supply Changes
7/26/04
2-3
Figure 2-4 Waste Bottle Cap and Gasket
2.2
Ink Supply Changes
To reduce the chance of poor image quality, do not shake the ink supply bottles before
installation or during printing. Shaking does not improve ink consistency, but may
introduce unwanted air bubbles into the ink system. Follow these steps to correctly replace
the ink supply bottles:
1.
Follow the control panel message and/or go to the Ink Menu to select the color ink
to install or replace.
Important:
To prolong the life of the waste bottle gasket, the ink should always be
wiped off the following areas after emptying the waste bottle and before
reinstalling it:
•
Both sides of the gasket
•
Inside the cap
•
Top of the waste bottle inside and out