Oce Arizona 500 User Manual - page 112
Océ | Error Messages and Troubleshooting
6-6
SYSTEM ERROR [press ACCEPT to
restart]
purge air pressure failure
If the error returns after you press ACCEPT
to restart the printer, call your authorized
service representative.
SYSTEM ERROR [press ACCEPT to
restart]
carriage encoder error
If the error returns after you press ACCEPT
to restart the printer, call your authorized
service representative.
SYSTEM ERROR [press ACCEPT to
restart]
TAKEUP MOTOR or ENCODER
Replace the take-up roll, if empty. Check
that the take-up core is correctly installed on
the mandrel hubs. If the error does not clear,
call your authorized service representative.
SYSTEM ERROR [press ACCEPT to
restart]
SUPPLY MOTOR or ENCODER
Replace the supply roll, if empty. Check that
the supply core is correctly installed on the
mandrel hubs. If the error does not clear, call
your authorized service representative.
SYSTEM ERROR [press ACCEPT to
restart]
FEED MOTOR or ENCODER
Check for a possible media jam. If the error
does not clear, call your authorized service
representative.
SYSTEM ERROR [press ACCEPT to
restart]
TAKEUP DANCER
Verify the media is loaded properly,
especially the take-up roll. If the error does
not clear, call your authorized service
representative.
SYSTEM ERROR [press ACCEPT to
restart]
SUPPLY DANCER
Verify the media is loaded properly,
especially the supply roll. If the error does
not clear, call your authorized service
representative.
SYSTEM ERROR [press ACCEPT to
restart]
CARRIAGE STEPPER
If the error returns after you press ACCEPT
to restart the printer, call your authorized
service representative.
SYSTEM ERROR [press ACCEPT to
restart]
INK VACUUM FAILURE
If the error returns after you press ACCEPT
to restart the printer, call your authorized
service representative.
CONTROL PANEL MESSAGE
EXPLANATION AND ACTION