Oce Arizona 500 User Manual - List of Figures

7/26/04

ix

B  Print Head Maintenance and Nozzle Recovery 

Procedures

Cleaning Solution/Fluid Usage ........................ B-1

Material Usage............................................... B-1

Precautionary Messages ................................. B-2

General Recommendations for the 

Operator ................................................ B-2

Cleaning the Capping Station ........................ B-2

Cleaning the Carriage Face Plate.................. B-3

Cleaning Print Head Nozzle Plates................ B-3

Flushing a Print Head .................................... B-5

End of Day Nozzle Protection Procedure ...... B-6

C  Application Notes

List of Figures

Figure 1-1 Media Take-up Roller Holder ...................... 1-3

Figure 1-2 Circuit Breaker Switch Location .................. 1-4

Figure 1-3 Front External View..................................... 1-7

Figure 2-1 Ink Tray ....................................................... 2-1

Figure 2-2 Cleaning Solution/Fluid ............................... 2-2

Figure 2-3 Waste Bottle................................................ 2-2

Figure 2-4 Waste Bottle Cap and Gasket.....................2-3

Figure 2-5 Supply Ink ................................................... 2-4

Figure 2-6 Scanning the Ink Barcode ........................... 2-4

Figure 3-1 Left Clip Closed...........................................3-2

Figure 3-2 Left Clip Open ............................................. 3-2

Figure 3-3 Media Support System and Installing 

Media on the Mandrel ..............................3-3

Figure 3-4 Mandrel Assembly....................................... 3-4

Figure 3-5 Mandrel/Media Assembly on the 

Support Arms...........................................3-5

Figure 3-6 Secure the Mandrel/Media Assembly ......... 3-6

Figure 3-7 Feeding Media Over the Platen .................. 3-7

Figure 3-8 Pinch Roller Handle .................................... 3-7

Figure 3-9 Feeding Media Over the Drive Roll ............. 3-8

Figure 3-10 Wrap Around the Take-up Core ................ 3-8

Figure 3-11 Align and Tape the Media ......................... 3-9