Oce Arizona 500 User Manual - page 72

Océ | Control Panel

4-18 

Long Purge Nozzles

A long purge is the same as a low purge, except a nozzle print never follows the long purge. 

Follow these steps to perform a long purge:

1.

Navigate to:

MAINTENANCE 

spit heads

2.

Press the MENU button. You then see:

MAINTENANCE 

long purge nozzles

3.

Press the ACCEPT button. You then see:

INKS TO LONG PURGE 

B  C  M  Y  LC  LM

Use the +/- buttons to select the color or colors to long purge.

4.

Press ACCEPT to begin purging. You then see:

Cleaning Nozzles

please wait

Pump Cleaning Solution/Fluid

Cleaning solution/fluid is automatically pumped to the sponges in the capping station. The 

waste pump is turned On during the cleaning solution/fluid pump cycle and is left On for 

five seconds after the cycle is complete. The cleaning solution/fluid bottle is checked for 

being empty before the pump is activated. Follow these steps to perform a manual pumping 

of cleaning solution/fluid:

1.

Navigate to:

MAINTENANCE 

long purge nozzles

2.

Press the MENU button. You then see:

MAINTENANCE 

pump solvent

Warning:

Media must be installed prior to performing this function.