SAGEMCOM MF 4591 User Manual - page 38
38
Sagemcom · MF 4591
EN
Copier
Loading Documents
· Loading Documents
Specifications for Documents
Unsuitable Documents!
1. Insert the documents face down into the docu-
ment feeder. The lower most document will be
fed in first. You can insert up to 30 documents
(80¦g/m²) at a time.
2. Push the document guide inwards, so that it lies
level on the documents.
3. Set the desired resolution. You can choose be-
tween:
DEFAULT (for documents without special
features),
FINE (for documents with small print
or drawings),
SFINE (for documents with many
details) and
PHOTO (for photos). Press f. The
configured resolution appears on the display.
Press
f again to change the resolution.
Spaltenumbruch
%%%Spaltenumbruch$$$
8 Copier
Specifications for Docu-
ments
Width of Documents
140¦–¦218¦mm
Length of Documents
128¦–¦600¦mm
Paper Weight of the
Documents
60¦-¦90¦g/m²
Capacity
30 page (60¦-¦90¦g/m²)
Manufacturer’s Recom-
mendation for Optimum
Operation
A4 · A5 · Letter · Legal
(80¦g/m²
CAUTION!
Unsuitable Documents!
Do not insert any documents into the device
that ...
... are wet, have been edited with correction
fluid, are soiled or have a coated surface.
… that are written on with a soft pencil,
with paint, chalk or charcoal.
… originate from newspapers or magazines
(printing ink).
… that are held together with office or
notebook staples or with tape or glue.
… that are pasted with note papers.
… that are creased, crumpled or torn.
Setting the Resolution for the Copier
There are different levels of resolution
available for copying documents. Select
the function
Make Copy Using User-De-
fined Settings
, in order to set the resolu-
tion level (see also chapter
Make Copies
Using User-Defined Settings
, page 39).
Set Resolution
You can select the default resolution set-
ting (see also chapter
Set Resolution
, page
60).