SAGEMCOM MF 4591 User Manual - page 67
Telephone Lines and Additional Devices · Selecting the Dialling Process
67
EN
Telephone Lines and Additional Devices
Selecting the
Dialling Process
· Selecting the Dialling Process
Function is not supported in all countries and networks
(Function is not supported in all countries and net-
works)
In some countries you can set the dialling mode to
pulse dialling or tone dialling (DTMF tones).
Selecting the Dialling Process
1. Press
OK, 053 and OK.
2. Use
[ to select the desired dialling process.
3. Confirm with
OK.
Set up the Public
Switch Telephone
Network (PSTN)
· Set up the Public Switch Telephone Network (PSTN)
Function is not supported in all countries and networks
(Function is not supported in all countries and net-
works)
Public Switch Telephone Network (PSTN)
Set up the Public Switch Telephone Network (PSTN)
Your device is automatically adjusted to the tele-
phone network if you set the country correctly (see
also chapter
Selecting the Country
, page 58). It is
possible that further settings are required for the
Public Switched Telephone Network (PSTN). Ask
your retailer or the technical customer service de-
partment.
1. Press
OK, 032 and OK.
2. Select the desired setting using
[.
3. Confirm with
OK.
Set up Private
Branch Exchange
(PABX)
· Set up Private Branch Exchange (PABX)
PABX Systems
Private branch exchanges (PABX) are typical in many
offices and some households. You must dial an out-
side line access code in order to get a connection to
the public telephone network (PSTN) from a PABX.
Additional Telephone No Extension
Set up Private Branch Exchange (PABX)
You can set up your device for operation on an exten-
sion, indicate the length of the internal numbers (di-
rect dial number) and save the code which must be
selected in order to reach the Public Switched Tele-
phone Network (PSTN) (= outside line access code).
Outside Line Access Code is Automatically Dialled
Set the connection type
1. Press
OK, 051 and OK.
2. Use
[ to set whether you operate your device
on an extension.
3. Confirm with
OK.
Setting the Outside Line
Access Code
Enter the length of the direct
dial number
1. Press
OK, 0521 and OK.
2. Enter the appropriate length for internal num-
bers. Use
C to delete individual characters. As-
sume the longest internal number, then add one
digit to that. If your direct dial numbers consist
of four digits, then you should input
5.
3. Confirm with
OK.
14 Telephone Lines and
Additional Devices
Selecting the Dialling Process
Only use pulse dialling if tone dialling is not
yet activated for your telephone line.
Public Switch Telephone Network (PSTN)
You can use this function to set your device to
connect to the Public Switch Telephone Net-
work (PSTN) (see also chapter
Set up Private
Branch Exchange (PABX)
, page 67).
Additional Telephone No Extension
An additional telephone connected to the de-
vice on a telephone socket is not considered
an extension.
Outside Line Access Code is Automatically
Dialled
Once these settings are in place, you will no
longer need to prefix the outside line access
code every time you enter an external
number. The device will automatically add
the outside line access code in front of num-
bers that are the same length or longer than
the configured direct dial numbers.