SAGEMCOM MF 4591 User Manual - page 65
Settings · Locking the Device
65
EN
Entering User Name
1. Press
OK, 6042 and OK.
2. Enter the user name/login name for the SMTP
server.
3. Confirm with
OK.
Entering Password
1. Press
OK, 6043 and OK.
2. Enter the password.
3. Confirm with
OK.
Locking the Device
· Locking the Device
Locking the Device
With the locking function, you can prevent unauthor-
ised persons from using your device. Only after en-
tering of the correct code will it be possible to access
functions or enter numbers. The lock will turn itself
on again after each use of the device.
Entering the PIN Code
Default Access Code
1. Press
OK, 921 and OK.
2. Enter a four-digit PIN code.
3. Confirm with
OK.
4. Enter the code again for confirmation purposes.
5. Confirm with
OK.
Locking the Keyboard
Locking the Keyboard
This function locks the entire keyboard of the device.
1. Press
OK, 922 and OK.
2. Enter the four-digit PIN code.
3. Confirm with
OK.
4. Use
[ to select whether you would like to turn
the function on or off.
5. Confirm with
OK.
Locking Manual Dialling
Locking Manual Dialling
This function blocks the manual dialling of tele-
phone numbers. Numbers from the telephone book
can be called. Manual dialling of emergency number
is not possible.
1. Press
OK, 923 and OK.
2. Enter the four-digit PIN code.
3. Confirm with
OK.
4. Select with
[ONLY DIRECT..
5. Confirm with
OK.
Lock USB Storage Medium
Lock USB Storage Medium
You use this function to block access to a connected
USB storage medium.
1. Press
OK, 925 and OK.
2. Enter the four-digit PIN code.
3. Confirm with
OK.
4. Use
[ to select whether you would like to turn
the function on or off.
5. Confirm with
OK.
Lock Settings
Lock Settings
This function blocks the changing of settings on your
device. The settings can be locked with a customiza-
ble administrator pin code
Entering the PIN Code
Default Access Code
1. Press
OK, 0001 and OK.
2. Enter a four-digit PIN code.
3. Confirm with
OK.
4. Enter the code again for confirmation purposes.
5. Confirm with
OK.
Activate and deactivate
functions
1. Press
OK, 0002 and OK.
2. Enter the four-digit PIN code.
3. Confirm with
OK.
4. Use
[ to select whether you would like to turn
the function on or off.
5. Confirm with
OK.
Print Lists and
Reports
· Print Lists and Reports
Printing the Functions
List
Printing the Functions List
Press
OK, 81 and OK to print a list of all func-
tions of your device.
Printing the Functions List
Default Access Code
The function is switched off with the factory-
installed access code (
0000). Change the ac-
cess code to switch on the function. If you
want to switch the function off enter the fac-
tory-installed code
0000 again.
Entering the PIN Code
If you have already saved a code, the de-
vice will ask you to provide the old code
first before you can enter a new code.
Default Access Code
The function is switched off with the factory-
installed access code (
0000). Change the ac-
cess code to switch on the function. If you
want to switch the function off enter the fac-
tory-installed code
0000 again.
Entering the PIN Code
If you have already saved a code, the de-
vice will ask you to provide the old code
first before you can enter a new code.
Help Button
You can also print the function list by press-
ing
¨. Select with [FUNCTION LIST. Con-
firm with
OK.