SAGEMCOM MF 4591 User Manual - page 75
Service · Fixing a Paper Jam
75
EN
6. Place the toner cartridge into your device. The
cartridge should snap securely into position.
7. Close the device.
Clearing Paper Jam in
the Fuser Unit
1. Open the paper jam flap on the reverse side of the
device.
2. Remove the paper guide on the fixer unit by
pressing the tension lever on both sides down-
wards.
3. Carefully pull out the paper.
4. Close the paper jam flap. The fuser levers will au-
tomatically fold into starting position when the
paper jam cover is closed.
CAUTION!
Toner Cartridge Not Inserted Correctly!
If the device cover would not close, the
toner cartridge is not inserted correctly.
Take the toner cartridge out and insert it
again correctly.
DANGER—HEAT!
Device Parts are Hot!
The fuser unit and and its surroundings
inside the device become hot during op-
eration. Do not touch these parts if you
have opened the device. Proceed with
care when you are removing a paper jam
for instance.
Continue Print Job
Press
o after the problem has been recti-
fied to continue the print job. Press
j to
suppress the error message.