SAGEMCOM MF 4591 User Manual - page 62
62
Sagemcom · MF 4591
EN
Enter the character
height
1. Press
OK, 0054 and OK.
2. Enter the character height of the standard font
(point). The value must lie between 4.00 and
999.75 (the standard value is 12.00).
3. Confirm with
OK.
Define the line break
1. Press
OK, 0055 and OK.
2. Enter how the line and/or paragraph breaks
should be treated.
3. Confirm with
OK.
Setting up page
orientation
1. Press
OK, 0056 and OK.
2. You can set whether to print in letter or land-
scape format.
3. Confirm with
OK.
Setting the font
1. Press
OK, 0057 and OK.
2. Enter the number of the desired standard font.
The value must lie between CS1 and CS30 (the
standard value is CS1, Roman8).
3. Confirm with
OK.
Setting the Fax
Reception Mode
· Setting the Fax Reception Mode
Fax Switch
The built-in fax switch of your device distinguishes
between fax messages and telephone calls. Faxes are
automatically received, telephone calls can be re-
ceived—even on additionally connected devices.
While the device is checking the call, it continues to
ring.
Setting the Fax Reception Mode
You have the following options available. The select-
ed fax reception mode appears on the display.
1. Press
OK, 041 and OK.
2. Select the desired option using
[.
3. Confirm with
OK.
Manual Mode
Manual Mode
(
MANUAL)
Manual Mode
The device will not receive faxes on its own. You can
start fax reception manually, by pressing
o. This
setting is useful, when you want to receive faxes via
a modem connected to a computer.
Fax Mode
Fax Mode
(
FAX)
Fax Mode
In the fax mode, the device will ring for as many
times as you have set with function 042 (see also
chapter
Setting the Number of Rings
, page 60). Then
the fax reception switches on. You should select this
mode if you primarily receive faxes at your device.
EXT/Answering Machine
Mode
EXT/Answering Machine Mode
(
FAX-ANSWER)
EXT/Answering Machine Mode
You should set the device to this mode if you have
additional devices connected to the
Ï/EXT. socket
of your device. If an additionally connected answer-
ing machine receives a call, your device will check to
determine whether or not the incoming call is a fax
transmission. If the device recognises a fax signal, it
will automatically receive the fax transmission.
Answering Machine
If you do not have an answering machine connected
or if a connected answering machine does not accept
the call, the device will take over the call after a pre-
determined number of rings and automatically re-
ceive any possible fax transmission being sent.
Fax Switch 1
Automatic Mode
Automatic Mode
(
AUTOMATIC)
Automatic Mode
If the Automatic Mode is active, the device will check
to determine whether the incoming call is a fax
transmission or a telephone call. The device will au-
tomatically receive fax transmissions. While the de-
vice is checking the call, it continues to ring. You can
accept telephone calls at any time. After a predeter-
mined number of rings, the device will take over the
call and automatically receive a possible silent fax
transmission.
Silent Fax Reception
· Silent Fax Reception
Silent Fax Reception
Set the number of rings
0 (see also chapter
Setting
the Number of Rings
, page 60) and set the fax recep-
tion mode to fax mode (see also chapter
Setting the
Fax Reception Mode
, page 62), in order to receive fax-
es without your device ringing.
Fax Reception Mode with Additional
Devices
You should set the device to EXT/Answer-
ing device, Fax or Manual Mode if you
have additional devices connected to the
Ï/EXT. socket of your device.
Fax at Additional Telephone
If you pick up at an additional device and hear
that you are receiving a fax (whistling tone or
silence), you can start the fax reception by
pressing
*5 on the additional telephone
or pressing
o on the device. To use this func-
tion, additional telephones must be set to the
tone dialling mode (DTMF/MFV tones) (for
this purpose see the operating manual of
your additional telephone).