SAGEMCOM MF 4591 User Manual - page 81
Service · Error Messages and Possible Causes
81
EN
TONER EMPTY
NON GENUINETONER
NOT INSTALLEDTONER
Problems with the toner cartridge: Toner cartridge
empty, damaged, incorrect or no toner cartridge in
device. Check the paper tray (see also chapter
Chang-
ing the Toner Cartridge
, page 71).
The toner cartridge is empty and must be replaced.
Use only original consumable materials.
DEFECT TONER
The toner cartridge is not inserted correctly or can
not be detected. Remove the toner cartridge from the
device and insert the toner cartridge again. If the
problem repeats, is the toner cartridge damaged and
must be replaced (see also chapter
Changing the Ton-
er Cartridge
, page 71). Use only original consumable
materials.
PRINT JOB ERROR
Error when printing or copying. Print job is aborted.
Repeat the print job or copy process.
COOLING PRINTER
There could be a small pause after printing several
pages. The device continues printing automatically.
PRINTER SYSTEMERROR
FUSER UNITERROR
PAPER FEEDER ERROR
LED ERROR
SCANNER ERROR
ROLLER DIRTY
Device error! Use the quick help (see also chapter
Power Cycling
, page 78). If the problem repeats,
please contact our technical customer service or your
retailer.
General Error Messages
Possible Cause(s)
USB Storage Medium Error Mes-
sages
Possible Cause(s)
MEDIA FULL
No storage space is available on the inserted USB
storage medium (USB stick, external hard drive, etc.).
Purge the data media or delete files to create storage
space.
MEDIA MISSING
There is no USB storage medium (USB stick, external
hard drive) connected to the device. Check whether a
USB storage medium is connected. Disconnect this
and connect it again.
WRONG MEDIA
The inserted USB storage medium cannot be ac-
cessed (no read/write access). It is possible the USB
storage medium is damaged or uses an unsupported
file system. The device only recognises storage media
which are formatted with
FAT16
or
FAT32
.
NTFS
is
not supported.
USB OVERLOAD
The power consumption is too high or a USB device is
defective. All USB devices are deactivated.
1. Remove all connected USB devices.
2. Press
o.
3. Insert another USB device into the device. Note
with which USB device the error message occurs.
You can only connect one high power device (USB
2.0) to each USB connection. Do not connect addi-
tional devices—such as batteries, fans, charging de-
vices—to your machine.