SAGEMCOM MF 4591 User Manual - page 59
Settings · Setting the Date and Time
59
EN
Setting the Date and
Time
· Setting the Date and Time
Entering the Date and
Time
1. Press
OK, 011 and OK.
2. Enter the date (two digits for each field), for ex-
ample
31¦05¦25 for May 31th,
2025.
3. Enter the time, e.g.
1400 for 2 pm.
4. Confirm with
OK.
Set the Time Zone
UTC
Coordinated Universal Time (UTC) is the current
standardised universal time format used. Starting
from Greenwich in London (Zero Meridian), the world
is split into time zones. These time zones are indicat-
ed with a deviance from UTC (in hours) for instance
UTC+1 for Central European Time (CET)
Set the Time Zone
In countries with several time zones, you can select
from preset time zones or enter the deviance of your
time zone from UTC. In countries with one time zone,
the setting is adjusted automatically if you set the
country correctly (see also chapter
Selecting the
Country
, page 58).
1. Press
OK, 012 and OK.
2. Use
[ to select the time zone in which you are
operating the device.
3. Enter the Deviance from UTC Manually: Enter
the deviance (in hours) using the numeric key-
pad, for example,
1 for UTC+1, The display
shows the time zone editor.
4. Confirm with
OK.
Automatic Changeover Between Summer Time/Winter Time
Spaltenumbruch
%%%Spaltenumbruch$$$
Set the Time
Synchronization with
SNTP Server
Introduction
With the simple time network protocol (SNTP), you
can synchronize the date and time of your device
with a server in the network automatically.
Activating the Server Access
1. Press
OK, 0103 and OK.
2. Use
[ to select whether you would like to turn
the function on or off.
3. Confirm with
OK.
Enter the SNTP Server Address
1. Press
OK, 0101 and OK.
2. Enter the name of the SNTP server.
3. Confirm with
OK.
Enter the SNTP Server Port
1. Press
OK, 0102 and OK.
2. Enter the server port number (default setting:
123).
3. Confirm with
OK.
Entering Your
Telephone Number
and Name
· Entering Your Telephone Number and Name
Page Header
Your name and number are added together with date,
time and page number at the top edge of each fax
transmission (= header).
Cursor Navigation 1
Entering Name
1. Press
OK, 021 and OK.
2. Enter the name using the keys (A—Z).
3. Confirm with
OK.
Entering Number
1. Press
OK, 022 and OK.
2. Enter your number.
3. Confirm with
OK.
Time Zone Editor
Press
[ to change the sign (+/-). You
can also enter values under an hour, exam-
ple, 0.15 (or 0.25) for a quarter of an hour,
0.30 (or 0.50) for half an hour or 0.45 (or
0.75) for three quarters of an hour.
Automatic Changeover Between Summer
Time/Winter Time
With setting the country and time zone, the
automatic changeover between summer and
winter time is switched on. The automatic
changeover is switched off if you enter the
deviance from UTC manually using the time
zones editor
Enter the Server Address
This name can be in the form of an IP ad-
dress, a DNS address or a NetBIOS name.
Enter Letters
Enter capital letters by pressing and holding
ú key. You can enter space using ½.
To insert special characters and symbols,
press
ü. Press ûü to insert language spe-
cific special characters. Select with
[. Con-
firm with
OK.
You can move the cursor using
[. Use C to
delete individual characters.