Tadiran Telecom EMERALD ICE Installation Manual - page 68
3-20
Emerald ICE Installation & Hardware Reference Manual
In
stallation
3
6. Press the softkey beneath
show
to add Day members to the ring list. By
default,
NULL
will be displayed until a new member is added. Enter a
3‐digit extension from using the telephone keypad and then press the
softkey beneath
next
to add additional extensions.
7.When all of the desired extensions have been added, press the
h
button to
return to the Day programming screen. Press the softkey beneath
next
to access the Night Mode programming screens. When the Emerald ICE
system is in the Night Service Mode, 1 extension/Hunt Group (UCD) may
be assigned to ring for the Door Phone.
8. Enter a 3‐digit extension from using the telephone keypad. If changing an
extension, press the softkey beneath
chg
to change an existing extension.
If no extensions were entered previously,
NULL
will be displayed.
9. When the desired Night mode extension has been added, press softkey
beneath
next
to advance to the Unlock Code programming screen. If
connected to the Door Phone, any dial pad digit can be pressed to trigger
the relay and operate the door opener. Press the soft key beneath
chg
to
scroll through Unlock Code characters. (Range: 0~9, *, #; Default: #)
10. When the desired Unlock Code has been selected, press the softkey
beneath
next
to access the Lock Open Time programming screen. This is
a timer that determines how long the relay operates when the Unlock
Code is dialed. Enter a value from the telephone keypad and press the
softkey beneath
save
to save your entry. Press the softkey beneath
chg
to change an existing Lock Open Time. (Range: 50~5000 milliseconds;
Default: 250 milliseconds)
11. Press the Volume button (
V
) to return the DB Item Select Screen.
MEMBER 1:NULL
back next chg
NIGHT :NULL
back show chg
DOOR PHONE
bksp show chg
LOCK OPEN_T: 250
back next chg