Tadiran Telecom EMERALD ICE Installation Manual - System Initialization
of
97
Emerald ICE Installation & Hardware Reference Manual
5-1
System
In
it
ia
li
za
ti
on
5
5
System Initialization
Proceed with the following to initialize the KSU.
1.Verify that the KSU power is OFF.
2.Verify that the jumper pins on J7 on the CCB Board are in the ʺCold Position.
3.‘Power up the KSU and wait 10 seconds.
4.Power down the KSU and move the J7 pins to the ʺNormalʺ position.
KSU Power Switch
J7 Pins to NORMAL
J7 Pins to COLD