Tadiran Telecom EMERALD ICE Installation Manual - page 73
of
97
Emerald ICE Installation & Hardware Reference Manual
4-3
RMP
Setu
p
4
Your PC must be connected with the Emerald ICE via a Straight 9‐Pin Connector
Cable which connects on the top of the CCB Board to a COM port on your PC.
Figure 4-3 Straight
9-pin Connection to CCB
Board
After installing the RMP application and connecting your PC with the KSU, you
are now ready to initialize your system.
Refer to the Emerald ICE Feature Programming Manual for instructions on
programming the various system features.
Connection
to CCB Board