Vacon 100 INDUSTRIAL Installation And User Manual - page 12
Other manuals for 100 INDUSTRIAL:
Installation Instruction, Installation Manual, Installation Manual, Installation Manual, User Manual, User Manual, Installation Manual, Applications Manual, Installation Manual, Applications Manual, Installation Manual, Applications Manual, Safety Manual, Marine Installation Manual, Installation Manual, Installation Manual
of
47
Modbus installation
vacon • 10
24-hour support +358 (0)40 837 1150 • Email: vacon@vacon.com
4
4.
M
ODBUS
INSTALLATION
Figure 3.
1
Open the cover of the AC drive.
The relay outputs and other I/O-terminals may have a dangerous control voltage
present even when Vacon 100 is disconnected from mains.
2
Locate the components that you will need on the AC drive to connect and run the
Modbus cables.
Be sure not to
plug the Modbus TCP cable to the terminal under the keypad! This
might harm your personal computer.
DANGER
WARNING