Vacon 100 INDUSTRIAL Installation And User Manual - page 14
Other manuals for 100 INDUSTRIAL:
Installation Instruction, Installation Manual, Installation Manual, Installation Manual, User Manual, User Manual, Installation Manual, Applications Manual, Installation Manual, Applications Manual, Installation Manual, Applications Manual, Safety Manual, Marine Installation Manual, Installation Manual, Installation Manual
of
47
Modbus installation
vacon • 12
24-hour support +358 (0)40 837 1150 • Email: vacon@vacon.com
4
Figure 6.
Figure 7.
4
Cut free the opening on the AC drive cover for the Ethernet cable (protection
class IP21).
5
Remount the AC drive cover.
NOTE:
When planning the cable runs, remember to
keep the distance between the Ethernet cable and the motor cable at a
minimum
of 30 cm
.
Ethernet
cable