VoiceGear SkyBridge User Manual - page 35
P a g e
| 35
Copyright ©2008 IndustryDynamics. All Rights Reserved.
6.1 Locale Settings
Locale settings describe the geographical location of the gateway and only need to be defined once unless the
gateway is physically moved.
Image 26: Locale settings
Details for each setting are outlined in the table below:
Setting
Description
International Phone Prefix International phone prefix is used by the system to simplify SkypeOut calling. By default,
SkypeOut service requires the international phone prefix to be entered for every call,
even if it appears to be a local call. VoiceGear SkyBridge will automatically prefix the value
of this setting to any SkypeOut call where it is not explicitly entered by the caller. The
proper value of this setting depends on the location of the gateway. For North American
locations, the value of “+1” should be used for this setting.
Time Zone
Time zone is used for system internal clock synchronization and should be set to the
closest entry to the physical location of the gateway.
Default Language
Default language setting is used to configure the language used for the web interface as
well as VoiceGear SkyBridge console. Out of the box, it is set to English.
Please Note:
A caller can override the international phone prefix by explicitly dialing it from a touch tone telephone. As an
example, a user can dial 416 123 4567 which would result in the system dialing +1 416 123 4567 if the prefix
is set to “+1”. Alternatively, a user can explicitly dial +1 416 123 4567 in which case the system will not add the
default prefix.