VoiceGear SkyBridge User Manual - page 41
P a g e
| 41
Copyright ©2008 IndustryDynamics. All Rights Reserved.
system.
Start Skype Conference
Command that converts the call currently in progress into a Skype conference.
End Skype Conference
Command that ends a Skype conference if there is one already in progress. All remote
parties in the conference at the moment of confirmation of this command will be
automatically dropped.
Switch User
Command that switches the currently logged‐in user to a different user provided a new
authentication sequence is entered that matches a valid user.
Switch to Anonymous
User
Command that logs out a currently logged in user.
Please Note:
Every command sequence that activates a feature has to start from the start command key and finish with
confirm command key in order to be properly recognized by the system.
Please Note:
To activate a Skype conference, it is necessary to enter the start command key, followed by start Skype
command key combination, followed by the Skype shortcut or a phone number of a remote party to be
included in a conference, followed by the confirm command key. For example, to initiate a Skype conference
with a remote party at 416 123 4567, it is necessary to enter *904161234567# from a touch tone phone if start
command key is defined as *, confirm command key is defined as #, and start Skype conference sequence is
defined as 90.