VoiceGear SkyBridge User Manual - page 64
P a g e
| 64
Copyright ©2008 IndustryDynamics. All Rights Reserved.
Setting
Description
Select Skype Account
Select Skype Account setting allows you to specify a list of Skype accounts to be managed
by this call route. Whenever there is an incoming call to one of the Skype accounts in this
list, it will be directed to the destination trunk as indicated in the second part of this
route. If the original Skype account is busy the incoming call will automatically rollover to
the next available account in this list.
Once you have selected the desired Skype account click “Add” button to add this Skype account to the list.
Please Note:
To manage ALL Skype accounts you can select “Any Skype account” option in the list.
The second part called “Route Them to the First Available Destination in the Following List” allows you to define
a list of PBX extensions from any of the trunks connected to VoiceGear where the call should be routed. The
order of destinations defined in this list is important because call forwarding will be attempted in the specified
order until a call is answered by one of the destination extensions.
Image 54: List of routing destinations: trunk, extension and post selection parameters
Please Note:
To manage ALL destinations trunks you can select “Any trunk” option in the list.
Setting
Description
Select Destination Trunk
Destination trunk setting is used to select the destination trunk where an incoming call
should be directed. If you are using an analog connection to the PBX, this list will have all
analog channels (1 through n) which are connected to PBX lines. If you are using SIP PBX
then you will have a list of all predefined SIP trunk (Channels ‐> SIP ‐> SIP Trunks menu)
connected to the PBX. This gives you a fine control over the destination of each call.
Use this Number as
Destination
Destination number setting is used to forward incoming calls to an extension using direct
inward dialing method. Destination number can be used if your PBX supports “direct