VoiceGear SkyBridge User Manual - page 57
P a g e
| 57
Copyright ©2008 IndustryDynamics. All Rights Reserved.
Most of the world tone zones have a predefined setting in this list. However, if your tone zone is not listed here,
or you require custom settings please select “Custom tones (advanced users)” entry from the list. This choice
will enable you to define custom dial tone settings in the “Custom PBX tones” section.
7.2.2 Custom PBX Tones
Custom PBX tones should be used only by advanced users who have a good understanding of tone definition
syntax as well as how tones are generated and used by various phone systems. If you want to learn more about
this feature, please review this online reference:
http://www.voip‐info.org/tiki‐index.php?page=Asterisk+config+indications.conf
Once you understand the syntax used for defining tones, you can create your own custom tones using the
settings shown below. Click “Save” button to apply your new tone settings, then click “Apply Now” button in the
notification area when you are asked to apply the new modifications.
Image 47: Custom PBX tones configuration
Now you can continue configuring your analog hardware. Clicking on the “Configure” button brings up a
configuration screen for the specific hardware. Analog hardware settings are divided into basic and advanced
categories.
7.2.3 Basic Configuration
Basic analog hardware configuration allows users to tweak analog hardware behavior and slightly adjust voice
quality to better fit the PBX system configuration.