VoiceGear SkyBridge User Manual - page 40
P a g e
| 40
Copyright ©2008 IndustryDynamics. All Rights Reserved.
match be found, the system will assume the number input is a SkypeOut phone number
and proceed with dialing.
Please Note:
If no authentication sequence is entered or if an authentication sequence cannot be matched against the user
database, the system will assume the user to be anonymous. For example, if user authentication prefix is set
to 11, username PIN length set to 2 and username password PIN length set to 3, a user can login using the
following sequence: 11 12 123. Should this sequence match an existing user, an authentication will succeed.
Should this sequence not match an existing user, authentication will fail and the system will assume an
anonymous user for the next call.
6.3.2 Feature Configuration During a Call
A greater number call features are available to a touch tone phone user when the call is already in progress. A
user can choose to convert a call into a conference or even logout and login with as a different user with a series
of simple touch tone numeric commands.
Image 31: Commands for users to use during a call
Detailed settings for features available during the call are shown in the table below.
Setting
Description
Start Command Key
Start command key indicates the start of command input. All commands that invoke
features while a call is in progress must start from this key.
Confirm Command Key
Confirm command key indicates the end of command input. All commands that invoke
features while a call is in progress must end with this key in order to get processed by the