VoiceGear SkyBridge User Manual - page 69
P a g e
| 69
Copyright ©2008 IndustryDynamics. All Rights Reserved.
allows you to place outgoing calls from Skype accounts with highest available credit.
8.2.2 Route Settings
There are two parts to defining a new route. The first part called “When Calling Out from One of the Following
Sources” allows you to select the source trunks which will be managed by this route. Adding a trunk to this list
means that this route will be applied each time a call is placed from the selected PBX trunk.
Image 58: Sources of calls to route via Skype accounts
Setting
Description
Select Source Trunk
Source trunk setting allows you to select the source trunk where an outgoing call is
originating from. If you are using an analog connection to the PBX, this list will have all
analog channels (1 through n) which are connected to PBX lines. If you are using SIP PBX
then you will have a list of all predefined SIP trunk (Channels ‐> SIP ‐> SIP Trunks menu)
connected to the PBX. This gives you a fine control over the origin of every call.
And Only From This Caller
ID
Caller ID setting allows you to filter calls from a particular caller ID of the selected trunk.
For example, you can specify the extension number of the PBX where the call is
originating from.
Once you have selected the desired source trunk and entered an optional Caller ID press the “Add” button to
add a new Call Source entry to this list.
Please Note:
To manage ALL source trunks you can select “Any trunk” option from the drop-down box.
The second part called “Route them Out through the First Available Skype Account in the Following List” allows
you to define a list of Skype accounts which will be used for placing the call. The order of Skype accounts defined
in this list is important because call forwarding will be attempted in the specified order until a call is answered
by one of the destination extensions.