VoiceGear SkyBridge User Manual - page 54
P a g e
| 54
Copyright ©2008 IndustryDynamics. All Rights Reserved.
Image 44: Basic SIP trunk configuration settings
Detailed list of basic SIP trunk settings is shown below.
Setting
Description
Description
A meaningful name to be used to distinguish between multiple defined SIP trunks.
Authentication Mode
This setting allows configuring a security level to use between VoiceGear SkyBridge
gateway and the PBX system. When set to “trusted”, VoiceGear SkyBridge assumes no
security is enabled and uses the specified remote side IP setting to access the PBX system.
When set to “authentication”, VoiceGear SkyBridge will also supply a defined username
and password for authentication prior to any call. In this case, authentication credentials
must much those set in the PBX configuration.
Link Mode
This setting tells the gateway whether it is connecting to a PBX system or a single SIP
client like a soft phone.
Username
Username used by the system in case authentication mode is not set to “trusted”.
Password
Password used by the system in case authentication mode is not set to “trusted”.
Auth Username
SIP auth username used by the system in case authentication mode is not set to
“trusted”.