Yamaha SXV70SJ Supplementary Service Manual - Spec
–96–
1
Handlebar holder
2
Thumb warmer coupler
3
Engine stop switch coupler
4
Thumb warmer switch coupler
5
Clamp the connectors.
6
Grip warmer connector
7
Grip warmer switch coupler
8
High beam switch coupler
9
Tail / brake light switch coupler
10
Parking brake cable
11
Clamp the tail / brake light switch
lead, high beam switch lead, grip
warmer lead and grip warmer
switch lead. Do not clamp the
parking cable and starter cable.
12
Oil tank breather hose
13
Left handlebar switch
14
Starter cable
15
Route the throttle cable and
starter cable through the holder.
16
Clamp the oil tank breather
hose.
17
Route the compression spring
through the holder.
18
Steering column
19
Clamp the fuel tank breather
hose.
20
Clamp the main harness and
steering gate.
21
Fuel tank breather hose
22
Fuel sender coupler
23
Oil level switch coupler
24
Y.P.V.S. lead connector
25
Attach the hexagon bolt to the
Y.P.V.S. bracket.
26
Clamp the main harness and fuel
sender lead.
Clamp them at the position of 30
X 40 mm (1.18 X 1.57 in) from
the end of the lead wire cover.
27
Lead wire cover
28
Body ground
CABLE ROUTING