Yamaha SXV70SJ Supplementary Service Manual - Spec
–88–
13
Clamp the side frame reinforce-
ment with the harness wire,
starter relay lead, gear position
switch lead and main harness.
14
Pass the coupler under the fuel
and oil reserve hose and the
coupler has to be hidden in the
inner panel.
15
Route the main switch lead be-
hind the instrument panel at-
taching screw.
16
Pass the parking brake cable un-
der the oil tank breather hose.
17
Route the main switch lead after
routing it backward once.
18
Pass the main harness over the
oil tank breather hose.
19
Brake hose
20
Wire harness
21
Starter cable
22
Oil level switch
23
Speed sensor
24
Coolant hose
25
Fold back the clamp and secure
it.
26
Drive V-belt guard bracket.
27
Secure the head light lead at the
protection tube area with the
clamp.
28
Gear position switch lead
29
Y.P.V.S. check coupler, or sub
lead coupler for model with start-
er motor
30
Route the wire harness so that it
will not get contact with the recti-
fier / regulator.
31
Rectifier / regulator
CABLE ROUTING