Yamaha SXV70SJ Supplementary Service Manual - Spec
9-38
SPEC
CABLE ROUTING
S
When fastening the wire harness
with the attached clamp, bend the
clamp inward to fasten.
T
Do not fasten.
U
Fasten the wire harness at the
white tape mark, with a clamp.
V
Oil hose
W
Coolant reservoir hose
X
To filler cap body
Y
Passenger grip warmer relay
coupler (VX700/VX700DX/
SX700/MM700)
Z
Passenger grip warmer relay
(VT700)
[
DC back buzzer (VX700DX/
VT700)
\
DC back buzzer coupler
(VX700DX/VT700)
]
DC back buzzer coupler (VX700/
SX700/MM700)
_
Connectors of the gear position
switch (VX700/SX700/MM700)
a
Pass the brake hose through the
hose guide.
b
Connectors of the gear position
switch (VX700DX/VT700)
c
To the gear position switch
d
Ensure this is not kink.
e
Fasten the wire harness, fuel
tank breather hose and oil tank
breather hose with a plastic band.
f
Install the starter lever to the
position as illustrated.