Yamaha SXV70SJ Supplementary Service Manual - Spec
9-40
SPEC
CABLE ROUTING
1
Make sure a plastic band is
routed through the projection
located on the silencer, when
fastening it around the wire
harness and the starter cable.
(VX700/VX700DX/VT700)
2
Starter cable
3
Make sure the plastic bands are
routed through the projection
located on the silencer, when
fastening them around the wire
harness.
4
Connectors of the carburetor
switch
5
Water temperature sensor
coupler
6
Starter relay lead (VX700DX/
VT700)
7
Ignition coil coupler
8
Make sure a plastic band is
fastened around the wire harness
to prevent the coolant reservoir
hose from kinking.
9
AC magneto couplers
0
Starter relay coupler (VX700/
SX700/MM700)
A
To the coolant reservoir tank
B
Coolant reservoir hose
C
Wire harness
D
Gear position switch
E
Route the parking brake cable
outside the gear position switch
leads.
a
0 ~ 5 mm (0 ~ 0.20 in)